Beckhoff CX9000 Manuale Utente Scaricare il pdf (Pagina 25)

Product overview

Embedded PC 23

Force TwinCAT in "Config Mode":

For some cases (e.g. errors in boot project) it is necessary to start TwinCAT in Config mode. So the boot project can

be corrected or other settings can be (re)setted.

1. Set dip switch 4 to ON (move switch 4 up).

2. Connect CX-System to power and boot system.

3. Make changes to the PLC

4. power down the system. Set dip switch 4 back to OFF (switch 4 down) and close cover.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 60 61

Nessun commento

Beckhoff CX9000 Manuale Utente Pagina 25